New South Wales Government

Department of

Environment and Climate Change

Skip links | Contact us | Help

Search: Advanced

You are here: Home > Air > Air quality > About air quality monitoring > Definitions

Definitions

Air pollutant  

The air pollutants monitored by the DECC and used in the AQI are ozone, carbon monoxide, sulfur dioxide, nitrogen dioxide and air particles. Visibility is also measured and reported. For other pollutants monitored see the monitoring site tables.
 

Air quality index (AQI) 

A value derived from air quality data readings, which allows for more meaningful comparison of pollutants affecting air quality. The index is derived using the following formula:

More about the AQI and how it is calculated

AQI

See air quality index

Carbon monoxide (CO) 

Carbon monoxide is an odourless, colourless gas produced by incomplete oxidation (burning). As well as wildfires, carbon monoxide is produced naturally by oxidation in the oceans and air of methane produced from organic decomposition. In cities, the motor vehicle is by far the largest human source, although any combustion process may produce it. Carbon monoxide enters the bloodstream through the lungs and prevents the normal transport of oxygen by blood. This can reduce the amount of oxygen reaching the body's organs and tissues, especially the heart. People suffering from heart disease are most at risk. They may experience chest pain if they are exposed to carbon monoxide, particularly while exercising. More about carbon monoxide
 

Cd

Cadmium. Measured at certain monitoring sites, but not used in reporting the air quality index (AQI).

CO

See carbon monoxide

Data readings 

In order to provide more detailed information than is available in the AQI (air quality index), measurements are also published as hourly data readings, and daily data readings, in scientific units rather than the derived values provided in the AQI.
More about the AQI

Goal

See standard

Health alerts 

A health alert is issued at 4.00pm when the AQI is likely to be above 100 the next day, when people sensitive to the effects of air pollution are likely to feel its impacts. Extreme episodes of air pollution, such as during prolonged bushfires, can affect everyone's health.

O₃

See ozone

NEPH 

Suspended fine particles as measured by a nephelometer

NEPM

National Environment Protection Measure

Nitrogen dioxide  (NO₂)

Nitrogen dioxide is found at highest concentrations near busy roads and can also be high indoors when unflued gas appliances are used. Nitrogen dioxide is also a respiratory irritant which may worsen the symptoms of existing respiratory illness. Nitrogen dioxide makes people with asthma more susceptible to lung infections and asthma triggers like pollen and exercise. More about nitrogen dioxide.

NO

Nitrogen oxide. Measured at certain monitoring sites, but not used in reporting the air quality index (AQI).

NO₂

See nitrogen dioxide

NO_x

Oxides of nitrogen. Measured at certain monitoring sites, but not used in reporting the air quality index (AQI).

Ozone (O₃) 

Near the ground, ozone is a colourless, gaseous secondary pollutant. It is formed by chemical reactions between reactive organic gases and oxides of nitrogen in the presence of sunlight. Ozone is one of the irritant secondary pollutants in photochemical smog and is often used as a measure of it. Ozone is more readily formed during the summer months and reaches its highest concentrations in the afternoon or early evening. If we breathe in too much ozone, it can irritate the lungs. Breathing ozone can affect lung function and worsen asthma. You may notice difficulty in breathing, coughing, and throat irritation if you are exercising outdoors when ozone levels are high.
More about ozone.

Particles (PM₁₀) 

Solid or liquid particles may be suspended in the air and reduce visual amenity and adversely impact health. The size of a particle determines its potential impact on human health. Larger particles are usually trapped in the nose and throat and swallowed. Smaller particles may reach the lungs and cause irritation there. Particles less than 10 micrometres in diameter measured using a high-volume sampler. See also TEOM-PM_10.
More about particles.

Pb

Lead. Measured at certain monitoring sites, but not used in reporting the air quality index (AQI).

PM₁₀

See particles.

Pollutant

See air pollutant

Region AQI

See site AQI

SO₂

See sulfur dioxide

Site AQI 

For each site, the highest AQI is used as the Site AQI. For each region; the highest Site AQI is used as the Regional AQI for that region. 

More about the AQI and how it is calculated.

Sulfur dioxide  (SO₂)

The main human activities producing sulfur dioxide are the smelting of mineral ores containing sulfur and the combustion of fossil fuels. Sulfur dioxide is a respiratory irritant and may worsen existing respiratory illness.
More about sulfur dioxide.

Standard 

The standards for ozone, carbon monoxide, sulfur dioxide, nitrogen dioxide and air particles were set in 1998 by the National Environment Protection Council. The standard for visibility is set by NSW. More about the standards.

TEOM-PM₁₀ :

Particles less than 10 micrometres in diameter measured using a tapered element oscillating microbalance. See also particles (PM₁₀)

TSP

Total suspended particulates

Unhealthy, unhealthy for sensitive people, very unhealthy

See health alerts